So, you won’t be able to get rid of the static noise. If the cable is still loose and it jiggles, then it won’t properly connect to the interface or amp. Check the cable of your speakers or headphones, too. If not, then give it a gentle push to plug it all the way in. As such, make sure that the jack of your mic has been pushed far enough into the port of your audio interface, amp, or computer. Bad Cable ConnectionĪ cable or jack that is not sitting or plugged correctly in its port can cause static noise. If the static is still there, keep adjusting this knob until it gets to the gain level where you can no longer hear any static noise.Ĭheck out my picklist for the Best Condenser Mics For Less Than $200. Turn the gain down one to two decibels and try talking into the mic to see if it worked. To get rid of the static in this particular case, you need to find the “input” or “gain” knob on your interface, amplifier, or on the mic itself. So you will need to lower the gain slowly and check the static as you go along.
There is no universal setting for gain since not all microphones are the same in terms of sensitivity. Solution: Lower Gain on Your Audio Interface, Amp, or Mic So you can just imagine how noisy it could get if the gain is too high. As such, a mic with a high sensitivity level would naturally require less preamp gain. So even if you expose these mics to the same sound source, they would produce different levels of audio output. For example, condenser mics generally have a higher sensitivity than dynamic mics. Moreover, keep in mind that different microphones have different sensitivity levels, some of them being way more sensitive than others. So if the gain has been set too high, the more likely your mic is going to pick up background noise then amplify this noise into static. Even more so if your mic is very sensitive.Īs a rule of thumb, remember that the higher the gain, the louder your mic’s output volume is. If this is the case, you may hear some buzzing sound or electronic noise. In many cases, the static noise produced by your microphone is caused by the gain, which may be set too high on your audio interface or your amplifier. Microphone Is Too Close to Speakers, Amps, and Other Electronics.Solution: Lower Gain on Your Audio Interface, Amp, or Mic.
0 kommentar(er)
